Dental Avenue Avue Bond Dual

STEP 1:

• Apply avuebond dual part A generously with a brush onto the enamel and dentin surface for 30 seconds with agitation. The material should build a homogeneous layer.

STEP 2:

• Remove excess material carefully.

STEP 3:

• Dry cautiously with oil free air for about 15 seconds to remove all volatile components and to disperse the adhesive to an layer. Do no dedicate the dentine.

STEP 4:

• Cure the avuebond dual part A with a suitable light curing unit for 20 seconds before application of a second’s layer of avuebond dual part A.

STEP 5:

• Do not rinse off the aveubond dual part A if not used immediately, place dispensed avuebond dual part A in subdued light to prevent premature polymerization by incident light.

STEP 6:

• The avuebond dual part A will not self-cure. Apply again the avuebond dual part A generously with a brush onto the adhesive surface as described above. Before placement of a light cure composite.

• 1 x 5ml Part-A bond
• 1 x 5ml Part-B bond
• Accessories